ANSI C82.6-2005
|
ID： |
ABB19205C3C842FCB4222223EAA252F2 |
|
文件大小(MB)： |
0.27 |
|
页数： |
29 |
|
文件格式： |
|
|
日期： |
2007-12-7 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
ANSI C82.6-2005,Proposed Revision of ANSI C82.6-1985,American National Standard,Approved: February 14, 2005 Secretariat: ANSLG – National Electrical Manufacturers Association,for lamp ballasts.,Ballasts for High-Intensity Discharge Lamps – Methods of,Measurement,An American National Standard implies a consensus of those substantially concerned with its scope and,provisions. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The,existence of an American National Standard does not in any respect preclude anyone, whether he has,approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes,or procedures not conforming to the standards. Users are cautioned to obtain the latest editions.,The American National Standards Institute does not develop standards and will in no circumstances give,an interpretation of any American National Standard. Moreover, no person shall have the right or,authority to issue an interpretation of an American National Standard in the name of the American,National Standards Institute.,CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The,procedures of the American National Standards Institute require that action be taken periodically to,reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive,current information on all standards by calling or writing the American National Standards Institute.,. 2005 American National Standard Lighting Group, in affiliation with NEMA Page 1 of 29,ANSI C82.6-2005,Proposed Revision of ANSI C82.6-1985,American,National,Standard,Approval of an American National Standard requires verification,by ANSI that the requirements for due process, consensus, and,other criteria for approval have been met by the standards,developer. An American National Standard implies a consensus,of those substantially concerned with its scope and provisions.,Consensus is established when, in the judgment of the ANSI,Board of Standards Review, substantial agreement has been,reached by directly and materially affected interests. Substantial,agreement means much more than a simple majority, but not,necessarily unanimity. Consensus requires that all views and,objections be considered, and that a concerted effort be made,toward their resolution. The existence of an American National,Standard does not in any respect preclude anyone, whether s/he,has approved the standard or not, from manufacturing,marketing, purchasing, or using products, processes, or,procedures not conforming to the standards. It is intended as a,guide to aid the manufacturer, the consumer, and the general,public.,The American National Standards Institute does not develop,standards and will in no circumstances give an interpretation of,any American National Standard. Moreover, no person shall,have the right or authority to issue an interpretation of an,American National Standard in the name of the American,National Standards Institute. Requests for interpretations should,be addressed to the Committee Secretariat referred to on the title,page.,Printed and distributed by:,Information Handling Services/Global Engineering Documents,15 Inverness Way East, Englewood, CO 80112-5776,Under Contract with National Electrical Manufacturers Association,Copyright .2005 by American National Standard Lighting Group,In Affiliation with National Electrical Manufacturers Association,All rights reserved.,No part of this publication may be reproduced in any form,in an electronic retrieval system or otherwise, without,prior written permission of the publisher.,Printed in the United States of America,. 2005 American National Standard Lighting Group, in affiliation with NEMA Page 2 of 29,ANSI C82.6-2005,Proposed Revision of ANSI C82.6-1985,FOREWORD (This Foreword is not part of American National Standard C82.6-2005),Suggestions for improvement of this standard will be welcome. They should be sent to,Secretariat C82 Committee, American National Standard Lighting Group, 1300 North 17th,Street, Suite 1847, Rosslyn, VA 22209.,This standard was processed and approved for submittal to ANSI by the Accredited,Standards Committee on Lamp Ballasts, C82, and its Working Group C82 WG 01.,Approval of the standard does not necessarily imply that all working group members voted,for its approval.,This standard is a revision of ANSI C82.6-1985 and supercedes the aforementioned,standard and all supplements. Information concerning the approval of this standard is,based on the documents listed in the table below:,CDV RV,Revision CDV C82_m690 RV C82_m691,Howard Wolfman, Chair, ……
……